eufy Omni E28: Fabric and Floor Cleaner Guide

What the Bundle Includes

The eufy Robot Vacuum Omni E28 bundle comes with both a floor cleaner and a fabric cleaner, making it a single device that handles hard floors, carpets, and upholstery. This guide covers how to get the most out of these cleaning solutions with your Omni E28.

Key Product Facts That Affect Use

• eufy Robot Vacuum Omni E28 with Fabric Cleaner and Floor Cleaner: 3-in-1 Robot Vacuum, Mop, and Portable Deep Cleaner: All-in-one single device to tackle every mess, from carpets to hard floors and fabric surfaces. You can switch between floor and fabric cleaning without a separate machine, but the cleaning approach differs for each surface.

  

• eufy Robot Vacuum Omni E28 with Fabric Cleaner and Floor Cleaner: Unparalleled 20,000 Pa Suction For a Deep Clean: E28 delivers deep cleaning on both carpets and hard floors. High suction lifts embedded dirt from carpet fibers, while the mop handles hard floors — the floor cleaner solution helps break down grime for both.
• eufy Robot Vacuum Omni E28 with Fabric Cleaner and Floor Cleaner: Tackle Tough Stains: The HydroJet™ System cleans the mop 360 times per minute and applies 1.5KG of downward pressure to floor to achieve thorough and consistent deep cleaning while removing tough stains. When using the floor cleaner, the HydroJet™ system actively scrubs stains rather than just wiping, making it effective on dried-on messes.

Using the Floor Cleaner with Your Omni E28

The floor cleaner is designed for routine mopping on hard floors. Follow these steps for best results.

1. Fill the clean water tank: The 2.5L clean water tank provides enough water to mop a 180 sq m home 4 times. Add the recommended amount of floor cleaner to the tank before starting a mopping cycle.
2. Select a mopping mode: The robot automatically washes its mop pads with clean water during the cycle. The HydroJet™ system applies 1.5 kg of downward pressure and rotates the mop 360 times per minute for stain removal.
3. Let the station handle maintenance: After mopping, the All-in-One Station washes the mop pads with clean water and dries them with 35-50°C heated air to prevent odors and bacteria. The dust bin empties into the 3L bag, which needs replacement every 75 days.

Using the Fabric Cleaner on Carpets and Upholstery

The fabric cleaner is intended for carpets, rugs, and fabric surfaces like sofas or car seats. The Omni E28's 20,000 Pa suction works with the cleaner to lift dirt from deep within fibers.

1. Pre-treat visible stains: Apply the fabric cleaner directly to stained areas and let it sit briefly. The robot's strong suction then lifts the loosened dirt in one pass.
2. Use the portable deep cleaner attachment: The bundle includes a portable deep cleaner for spot cleaning. This is useful for upholstery or small carpet areas where the main robot cannot reach.
3. Allow surfaces to dry: After fabric cleaning, allow carpets and upholstery to air dry completely before use. The robot's heated drying is for mop pads only, not for cleaned fabrics.

Maintenance Tips for Long-Lasting Performance

To keep your Omni E28 running smoothly, empty the dust bag every 75 days and refill the clean water tank as needed. The Auto-Detangling DuoSpiral™ Brushes reduce hair wrap, but occasional brush inspection helps maintain suction. The CornerRover™ Arm ensures edges stay clean, so check it for debris buildup monthly. Use only the supplied floor and fabric cleaners to avoid clogging the system or damaging surfaces.