Back to Blog
How-to Guides 2026-11-21 eufy - Built with Care | Home Security System & Robovacs 0 views

How to Set Up eufy Omni S1 Pro Robot Vacuum with Replacement Kits

How to Set Up eufy Omni S1 Pro Robot Vacuum with Replacement Kits

Learn how to unbox, install, and start using your eufy Omni S1 Pro Robot Vacuum Bundle. This guide covers the 10-in-1 UniClean Station, mop system, and replacement kit setup.

What Comes in the eufy Omni S1 Pro Bundle

The eufy Robot Vacuum Omni S1 Pro + Replacement Kits bundle is designed for households that clean frequently. It includes the S1 Pro robot vacuum, the 10-in-1 UniClean Station, and a set of replacement accessories that last about 6 months. This guide walks you through unboxing, setting up the station, and getting your first cleaning cycle started.

Unboxing and Initial Setup

Before you begin, clear a space near a power outlet and a Wi‑Fi router for the base station. The station is compact but needs room for the LCD touch control and access to the clean water tank.

  1. Unpack the bundle: Remove the S1 Pro robot, the 10-in-1 UniClean Station, the power adapter, and the replacement accessory kit from the box. Keep the packaging until you have verified all components.
  2. Place the base station: Position the UniClean Station on a hard, level floor. Plug it into a wall outlet. The station handles auto‑emptying, washing, refilling, heated air drying, waste water collection, and detergent dispensing.
  3. Fill the clean water tank: The station has a built‑in clean water tank. Use tap water for best disinfection results. The station’s Eco‑Clean Ozone generator creates ozonated water from tap water to help sanitize floors.
  4. Install the replacement kit: The bundle includes replacement accessories such as a hygiene dust bag and mop pads. Follow the included instructions to swap out the initial components. The kit is designed to simplify accessory selection and lasts about 6 months.

Powering On and Connecting the S1 Pro

Press the power button on the S1 Pro robot. The LCD touch control on the station makes operation intuitive. Use the TrueCourse Mapping system (dToF LiDAR and 3D SLAM) to let the robot create a real‑time map of your home. The 3D MatrixEye obstacle avoidance system uses binocular infrared imaging and an RGB camera to navigate around furniture and cords.

Understanding the Always Clean Mop System

The S1 Pro features the Always Clean Mop system with a dual water reservoir design. The mop spins at 170 RPM and is continuously cleaned and rinsed by a mix of clean water and detergent. It exerts 1 kg (2.2 lb) of downward pressure to scrub stains. The mop head spans 290 mm (11.4 in.) for wide coverage. When the robot moves onto carpet, the mop auto‑retracts by 12 mm to avoid wetting the carpet.

Key Specifications at a Glance

  • eufy Robot Vacuum Omni S1 Pro + Replacement Kits: 8,000 Pa suction power removes deep‑seated dust and debris from hard floors and carpets. High suction ensures thorough cleaning in busy homes, especially on carpets where pet hair and tracked‑in dirt accumulate.
    eufy Robot Vacuum Omni S1 Pro + Replacement Kits
    eufy Robot Vacuum Omni S1 Pro + Replacement Kits
  • eufy Robot Vacuum Omni S1 Pro + Replacement Kits: The 10‑in‑1 UniClean Station auto‑empties, washes, refills, heat‑dries, collects waste water, and dispenses detergent. You don’t need to empty the dustbin or wash the mop manually after every run, saving time and effort.
  • eufy Robot Vacuum Omni S1 Pro + Replacement Kits: Eco‑Clean Ozone uses tap water to create ozonated water for disinfection, removing up to 99.99% of bacteria (E. coli tested in lab). For families who want an extra layer of floor sanitization without buying chemical solutions.
  • eufy Robot Vacuum Omni S1 Pro + Replacement Kits: The square design cleans edges and 90‑degree corners precisely. Traditional round robots often miss corners; the S1 Pro’s shape helps it reach along baseboards and into tight spots.

Running the First Cleaning Cycle

Once the map is created, you can start a full cleaning cycle. The robot will automatically return to the station to empty debris, wash the mop, and refill water. The LCD touch control lets you select cleaning modes, schedule runs, and monitor water levels. The see‑through water tank lets you check the water level at a glance.

Maintaining the Replacement Kit

The bundle includes a replacement kit that lasts about 6 months. It contains a hygiene dust bag, mop pads, and other wear‑and‑tear items. When the station prompts you to replace components, swap them according to the kit instructions. The detangling brush helps reduce hair wrap, so you may need to clean the brush less often.

Related Articles

Customer Service
Home
Products
Cart
Profile