Start with the firmware, not the ladder
Before you mount a single SoloCam S340, check the HomeBase S380 firmware. The supplied compatibility note states the SoloCam S340 is compatible with HomeBase S380 running firmware version V3.3.2.6 and above. Updating the HomeBase first avoids pairing surprises later and keeps the four cameras on the same supported foundation.
This kit bundles four SoloCam S340 cameras, one HomeBase S380, and the Smart Display E10. The cameras are solar-powered and wireless, so the order of work is: prepare the HomeBase, pair the cameras, place them for coverage, then bring the Smart Display online for everyday viewing.
What the bundle gives you to work with
- SoloCam S340 (4-Cam Pack) + HomeBase S380+ Smart Display E10: Includes four SoloCam S340 Wireless Outdoor Security Cameras with Dual Lens and Solar Panel, HomeBase S380 (HomeBase 3), and eufy Smart Display E10. Knowing the exact contents keeps you from hunting for a separate hub or display during setup.
SoloCam S340 (4-Cam Pack) + HomeBase S380+ Smart Display E10 - SoloCam S340 (4-Cam Pack) + HomeBase S380+ Smart Display E10: SoloCam S340 is compatible with HomeBase S380 with firmware version V3.3.2.6 and above. This is the one compatibility checkpoint to confirm before pairing.
- SoloCam S340 (4-Cam Pack) + HomeBase S380+ Smart Display E10: HomeBase S380 offers smart storage without the fees, and the SoloCam S340 provides local storage with no monthly fee. Storage is handled locally, so setup focuses on pairing and placement rather than subscription steps.
A practical order for the four-camera setup
The supplied records describe the hardware and its capabilities but do not include a step-by-step app walkthrough. Use the sequence below as a logical order, and follow the in-app prompts for exact pairing screens.
- 1. Update HomeBase S380 first: Power the HomeBase S380 and confirm its firmware is V3.3.2.6 or above before adding any SoloCam S340. This matches the supplied compatibility requirement.
- 2. Pair one camera at a time: Add each SoloCam S340 to the HomeBase S380 individually. Pairing one at a time makes it easier to name each camera by its location and confirm it appears correctly.
- 3. Place cameras for dual-view coverage: The SoloCam S340 offers dual views and 360° Guardian coverage. Use those two views to cover both a wide area and a closer detail zone, and use the solar panel to keep each camera charged.
- 4. Bring the Smart Display E10 online: Once the cameras are paired, set up the Smart Display E10 to see four views on one screen and receive hands-free door alerts.
Using the Smart Display E10 with four cameras
The Smart Display E10 is the everyday viewing piece of this kit. It shows four views on one screen, which suits a four-camera pack without switching between feeds. It also provides instant playback without waiting or buffering, smart daily reports with important events, and hands-free door alerts.
Because the SoloCam S340 includes dual views, you can decide which view from each camera earns a spot on the four-view screen. That is a viewing preference, not a fixed rule, so adjust it to what you actually want to see at a glance.
Installation details worth confirming before you drill
The supplied information confirms versatile installation and effortless setup, but it does not list mounting heights, angles, or screw specifications. Check the printed guide in the box for those details rather than guessing.
- Solar panel placement: The SoloCam S340 is solar-powered with the claim install once and it runs forever, subject to the asterisk in the supplied material. Place the panel where it receives consistent sunlight, and confirm the specific conditions in the product documentation.
- Wi-Fi and signal: The supplied records do not list Wi-Fi range or signal requirements. Test each camera's connection at its intended spot before permanent mounting.
- Local storage: The SoloCam S340 provides local storage with no monthly fee, and the HomeBase S380 provides smart storage without the fees. Confirm storage capacity and drive details in the supplied documentation, as the records here do not state them.
What to check after all four cameras are paired
Walk through each camera's live view in the app and on the Smart Display E10. Confirm the dual views are framed as you intended, that door alerts appear on the display, and that the daily report captures the events you care about. If a camera drops offline, revisit its placement and signal before adjusting anything else.
The HomeBase S380 also supports effortless recognition, proactive intruder deterrence, and a seamless security ecosystem. Those features depend on the app setup and the firmware version, so keep the HomeBase updated as part of routine maintenance.
