Guías prácticas 2026-11-16 eufy - Built with Care | Home Security System & Robovacs 0 vistas
Video Doorbell E340 2-Pack + HomeBase S380: Setup and Storage FAQ
Answers to the questions that come up when installing two E340 doorbells with HomeBase S380, from wiring and chime compatibility to local storage and firmware.
Before you install: power and placement questions
Can I install the E340 doorbells without existing doorbell wiring?
Yes. The E340 supports battery mode, which makes installation easy without any wiring. If you prefer wired mode, you'll need a power source that supplies 8 to 24V and more than 10VA, and the battery must remain installed. The wired connection tops up the battery for long-lasting performance.
What should I check before mounting the doorbells?
Confirm your Wi-Fi signal reaches both door locations, and decide whether you'll run wires or rely on battery power. If you plan to use wired mode, verify the voltage and VA of your existing transformer. Also check that your HomeBase S380 is running firmware version V3.3.2.6 or above, since the doorbells are compatible with that version and later.
Do both doorbells need to be the same model?
The 2-pack includes two identical E340 doorbells, so you get the same dual-camera setup at each door. Each unit has a front-facing camera for people and a downward-facing camera for the floor in front of the door, plus 2K Full HD clarity and Color Night Vision with a clear nighttime viewing distance of up to 16ft (5m).
Wiring and power for a two-doorbell setup
Can I wire one doorbell and use the other on battery?
Yes. Each E340 can be set up independently in battery or wired mode. You might wire the doorbell at your main entry and use battery mode at a side door where wiring is difficult. Just remember that wired mode still requires the battery to be installed.
What transformer specifications do I need for wired mode?
The supplied information specifies a power source of 8 to 24V and greater than 10VA. Check your existing doorbell transformer against these numbers before connecting. If your transformer doesn't meet them, battery mode is the simpler path.
How do I keep both doorbells charged if I use battery mode?
The E340 uses a quick-release battery. Keeping a spare battery on hand lets you swap and recharge without leaving a doorbell offline. In wired mode, the wired power source tops up the battery, so you won't need to remove it as often.
HomeBase S380 storage and compatibility
How does the HomeBase S380 store footage from the doorbells?
The HomeBase S380 is the hub that the E340 doorbells pair with. The supplied information confirms compatibility with HomeBase S380 firmware V3.3.2.6 and above, but does not detail storage capacity or recording schedules. For local storage specifics, check the HomeBase S380 documentation or app settings after pairing.
Do I need the HomeBase S380 for the doorbells to work?
The doorbells can connect to your existing chime, and they also pair with eufy HomeBase S280, eufy Minibase Chime (T8023), Alexa devices, and Google Voice Assistant devices. The S380 is included in this bundle and adds local storage and hub functionality, but the supplied information doesn't state whether every feature requires it.
Which chimes are not compatible with the E340?
The E340 is not compatible with the original eufy Wi-Fi Chime (T8020) or the eufy Chime (T8740/T8742). If you already own one of those, you'll need a compatible chime such as the Minibase Chime (T8023) or a HomeBase S280/S380 to hear alerts throughout your home.
Dual doorbell installation and daily use
How do I set up two doorbells in the eufy app?
The supplied information does not include a step-by-step app pairing sequence. In general, you would add each doorbell to the HomeBase S380 through the eufy app, naming them by location (e.g., Front Door, Side Door). For exact pairing steps, refer to the in-app instructions or the E340 user guide.
Can both doorbells record at the same time?
The supplied information does not specify simultaneous recording capabilities. The HomeBase S380 is designed to support multiple cameras, but check the S380 specifications for the number of simultaneous streams or recordings it can handle.
What night vision performance can I expect from the E340?
The E340 features Color Night Vision with a dual-light system and an advanced light-capturing algorithm. The supplied information states less blur than previous iterations and a clear nighttime viewing distance of up to 16ft (5m). That's useful for seeing faces and packages near the door after dark.
E340 2-Pack + HomeBase S380 at a glance
Video Doorbell E340 (2-Pack) + HomeBase S380: Dual Cameras, Double Security: front-facing camera focuses on people, downward-facing camera fills in the gaps with a view of the floor in front of your door. Two cameras per doorbell help you see both visitors and packages left on the ground.
Video Doorbell E340 (2-Pack) + HomeBase S380
Video Doorbell E340 (2-Pack) + HomeBase S380: 2K Full HD clarity reveals more details of your doorstep and anyone who drops by. Higher resolution makes it easier to identify faces and objects in recordings.
Video Doorbell E340 (2-Pack) + HomeBase S380: Battery or Wired, Your Choice: Battery mode makes installation easy. Wired mode requires the battery to be installed and a power source of 8 to 24V and >10VA. You can choose the power method that suits each door location, but wired mode has specific electrical requirements.
Video Doorbell E340 (2-Pack) + HomeBase S380: Compatible with HomeBase S380 with firmware version V3.3.2.6 and above. Ensuring your HomeBase firmware is up to date is a prerequisite for pairing the doorbells.
Video Doorbell E340 (2-Pack) + HomeBase S380: Not compatible with the original eufy Wi-Fi Chime (T8020) or eufy Chime (T8740/T8742). If you plan to use an existing chime, confirm it's not one of these models to avoid surprises.